How do I know the fan is failing?

Start with sound and airflow. A healthy sauna fan is quiet and moves noticeable air within a few seconds of powering up. Grinding or clicking, a blade that turns slowly or stops mid-session, a hum with no rotation, or a cabin that stays humid after a session all point to a worn motor or bearing.

Is the replacement fan a direct fit?

In most cases, yes. Cabin fans are built to a handful of standard frame sizes and voltages, so a matching fan drops into the original opening and reuses the existing wiring. Where a cabin is discontinued, we supply the closest equivalent and tell you in advance if an adapter bracket or a different connector is needed.

What information should I send with my request?

A photo of the fan in place, a photo of its label or stamped part number, the brand and model of your sauna, and one sentence about what it is doing (or not doing). If the label is gone, add the frame size and the blade diameter - that is usually enough to identify the part.

Do you ship to my state?

We ship to all 50 states and to Canada. Ground shipping is free on orders above $300; smaller orders show the exact rate before checkout, and we can quote a faster service if your cabin is out of use.

Is there a warranty on replacement fans?

Replacement fans carry the manufacturer warranty against defects. Keep your order number, and if a part fails, send photos and a description of the fault - we take the claim from there.

What if I am not sure which fan I need?

That is exactly what the form is for. Send photos and your cabin details, and a specialist identifies the fan, confirms the fitment and sends a quote. Identifying the part is free and does not commit you to an order.

How to Choose FANS for an Infrared Sauna

Find the cabin model and serial label - usually inside the door frame or on the power box.
Measure the fan frame and the blade diameter, plus the depth of the opening.
Check the voltage printed on the old motor; most home cabins in the US run 110-120V.
Match the wiring: spade terminals, screw posts or a plug-in harness.
Note where the fan sits - cabin wall, heater bay or control box - because airflow direction and heat rating differ for each position.

If the label is unreadable, photograph the fan in place together with its wiring and we will identify it for you.

Free Consult

Name *

Phone *

E-mail *

Problem description

Image

How to choose an infrared sauna fan

Helpful links

Select State