Select your state:
USA
Toll Free: +1-888-559-PART (7278)
International: +1-718-709-PART (7278)
24/7 Texting/SMS: +1-347-746-1765
infraredsaunafans.com

Infrared Sauna Fans and Blowers

A sauna fan is easy to ignore until it stops. When the cabin fan or the blower behind the heater bay fails, warm air stops circulating: the cabin heats unevenly, moisture lingers long after a session, and the electronics in the power box run hotter than they were designed to.

Almost every infrared cabin uses a small 110-120V axial fan behind a vent grille, a blower in the heater bay, or a cooling fan inside the control box - and all three are replaceable without touching the rest of the cabin. We stock circulation, exhaust and control-box fans for infrared saunas of most brands, including discontinued cabins whose original part number is long out of production.

Send a photo of the old fan and of the label inside your cabin, and a specialist confirms the fitment before you order.

Free Consult
Diagnostics

Signs your sauna fan needs replacing

A failing fan almost always warns you first. If any of these sound familiar, plan the replacement before the motor seizes completely.

  • The fan stays silent when the cabin powers up
  • Rattling, grinding or clicking coming from the vent grille
  • Weak airflow, and a cabin that stays humid long after a session
  • The fan runs only at full speed, or cuts out mid-session
  • A hot, dusty or burning smell near the vent
  • The control panel reports a fan, airflow or over-temperature error
Fitment

How to choose the right sauna fan

  • Find the cabin model and serial label - usually inside the door frame or on the power box.
  • Measure the fan frame and the blade diameter, plus the depth of the opening.
  • Check the voltage printed on the old motor; most home cabins in the US run 110-120V.
  • Match the wiring: spade terminals, screw posts or a plug-in harness.
  • Note where the fan sits - cabin wall, heater bay or control box - because airflow direction and heat rating differ for each position.

If the label is unreadable, photograph the fan in place together with its wiring and we will identify it for you.

Goods

Infrared Sauna Fans

Questions

Infrared sauna fan FAQ

The questions we are asked most often about replacing sauna fans. If yours is not here, send a photo through the form and we will answer it directly.

How do I know the fan is failing?
Start with sound and airflow. A healthy sauna fan is quiet and moves noticeable air within a few seconds of powering up. Grinding or clicking, a blade that turns slowly or stops mid-session, a hum with no rotation, or a cabin that stays humid after a session all point to a worn motor or bearing.
Is the replacement fan a direct fit?
In most cases, yes. Cabin fans are built to a handful of standard frame sizes and voltages, so a matching fan drops into the original opening and reuses the existing wiring. Where a cabin is discontinued, we supply the closest equivalent and tell you in advance if an adapter bracket or a different connector is needed.
What information should I send with my request?
A photo of the fan in place, a photo of its label or stamped part number, the brand and model of your sauna, and one sentence about what it is doing (or not doing). If the label is gone, add the frame size and the blade diameter - that is usually enough to identify the part.
Do you ship to my state?
We ship to all 50 states and to Canada. Ground shipping is free on orders above $300; smaller orders show the exact rate before checkout, and we can quote a faster service if your cabin is out of use.
Is there a warranty on replacement fans?
Replacement fans carry the manufacturer warranty against defects. Keep your order number, and if a part fails, send photos and a description of the fault - we take the claim from there.
What if I am not sure which fan I need?
That is exactly what the form is for. Send photos and your cabin details, and a specialist identifies the fan, confirms the fitment and sends a quote. Identifying the part is free and does not commit you to an order.

Infrared sauna parts are all we do. Send a photo of the failed fan, have the fitment confirmed by a specialist before you pay, and ship anywhere in the USA and Canada - free on orders above $300.

Still not sure which part you need?

Send a photo and a specialist confirms the fitment before you order.

Request a free quote